Titanium Gr5 rod
HEXON supply top quality Titanium Grade 5 rods (Ti6Al4V) for application in both general industrial and critical fields, such as aerospace and military. Better chemical composition, high tensile strength, homogeneous & defect-free microstructure and tight tolerance are advantages of our Gr5 rods, which will ensure the parts produced subsequently be safe and satisfactory – a significant thing for our customers all the time.
Other than the typical ASTM and AMS specifications, moreover, we have to consider how to meet those distinctive needs of Titanium Gr5 rods from our ambitious customers. Thanks to our experienced and skilled engineers, specially tailored composition (Al, V, O, Fe) and enhanced strength (raising through particular Solution heat Treated and Aged) could be realized by discussing with HEXON up on your specific technical requirements.
To verify our promise, the fully-traceable test reports containing chemical, mechanical, NDT and microstructure will play a role of endorsement for our quality assurance – we earn the trust from customers ONLY by credible documents, not by words.
If you need Ti6Al4V ELI (Grade 23) rods, please click Titanium Gr5 ELI to learn more about it.
Chemical composition of Ti6Al4V rods
Specification |
O max |
N max |
C max |
H max |
Fe max |
Y max |
Al |
V |
Residuals max each |
Residuals max total |
Balance |
ASTM B348 |
0.20 |
0.05 |
0.08 |
0.015 |
0.40 |
/ |
5.50-6.75 |
3.50-4.50 |
0.1 |
0.4 |
Titanium |
AMS 4928 |
0.20 |
0.05 |
0.08 |
0.0125 |
0.30 |
0.005 |
5.50-6.75 |
3.50-4.50 |
0.1 |
0.4 |
Titanium |
AMS 4965 |
0.20 |
0.05 |
0.08 |
0.0125 |
0.30 |
0.005 |
5.50-6.75 |
3.50-4.50 |
0.1 |
0.4 |
Titanium |
AMS 4967 |
0.20 |
0.05 |
0.08 |
0.0125 |
0.30 |
0.005 |
5.50-6.75 |
3.50-4.50 |
0.1 |
0.4 |
Titanium |
MIL-T-9047 |
0.20 |
0.05 |
0.08 |
0.0125 |
0.30 |
0.005 |
5.50-6.75 |
3.50-4.50 |
- |
0.4 |
Titanium |
Mechanical properties of Ti6Al4V rods
Specification |
Condition |
Diameter
(mm)
|
Tensile strength
(MPa, min.)
|
Yield strength
(MPa, min.)
|
Elongation in 4D
(%, min.)
|
Reduction of area
(%, min.)
|
|
ASTM B348 |
Annealed |
Up to 76.2 |
895 |
828 |
10 |
25 |
|
AMS 4928 |
Annealed |
Up to 50.8, incl |
931 |
862 |
10 |
25 |
|
Over 50.8 to 101.6, incl |
896 |
827 |
10 |
25 |
|||
Over 101.6 to 152.4, incl |
896 |
827 |
10 |
20 |
|||
AMS 4965 AMS 4967 |
STA ST+Annealed |
Up to 12.7, incl |
1138 |
1069 |
10(L) |
-- |
20 |
Over 12.7 to 25.4, incl |
1103 |
1034 |
10(L) |
-- |
20 |
||
Over 25.4 to 38.1, incl |
1069 |
1000 |
10(L) |
-- |
20 |
||
Over 38.1 to 50.8, incl |
1034 |
965 |
10(L) |
-- |
20 |
||
Over 50.8 to 76.2, incl |
965 |
896 |
10(L) |
8(T) |
20 |
||
Over 76.2 to 101.6, incl |
896 |
827 |
8(L) |
6(T) |
20 |
||
MIL-T-9047 |
Annealed |
Up to 101.6 |
896 |
827 |
10 |
25 |
|
Over 101.6 to 152.4 |
896 |
827 |
10 |
20 |
|||
STA |
Up to 12.7, incl |
1138 |
1069 |
10 |
20 |
||
Over 12.7 to 25.4, incl |
1103 |
1034 |
10 |
20 |
|||
Over 25.4 to 38.1, incl |
1069 |
1000 |
10 |
20 |
|||
Over 38.1 to 50.8, incl |
1034 |
965 |
10 |
20 |
|||
Over 50.8 to 76.2, incl |
965 |
896 |
10 |
20 |
|||
Note |
L – longitudinal 2) T – Transverse 3) STA – solution heat treated and aged 4) ST – solution heat treated |
Test reports of our Ti6Al4V rods for customers
Size and Tolerance
● Diameter – 3 mm and above
● Length - from 1000 mm to 4000 mm (other sizes available per request)
● Straightness - 1 mm/1000 mm
● Tolerance of diameter – from h6 to h13 (e.g. h9 tolerance for Dia. 8 mm is +0/-0.036 mm)
Diameter (mm) |
h6 |
h7 |
h8 |
h9 |
h10 |
H11 |
h12 |
h13 |
Tolerance precision (μm) |
||||||||
3 Max |
6 |
10 |
14 |
25 |
40 |
60 |
100 |
140 |
3~6 |
8 |
12 |
18 |
30 |
48 |
75 |
120 |
180 |
6~10 |
9 |
15 |
22 |
36 |
58 |
90 |
150 |
220 |
10~18 |
11 |
18 |
27 |
43 |
70 |
110 |
180 |
270 |
18~30 |
13 |
21 |
33 |
52 |
84 |
130 |
210 |
330 |
30~50 |
16 |
25 |
39 |
62 |
100 |
160 |
250 |
390 |
50~80 |
19 |
30 |
46 |
74 |
120 |
190 |
300 |
460 |
80~120 |
22 |
35 |
54 |
87 |
140 |
220 |
350 |
540 |
120~180 |
25 |
40 |
63 |
100 |
160 |
250 |
400 |
630 |
Delivery condition
● Surface turned / ground
● Annealed / Solution heat treated and aged (STA) / Solution heat treated and annealed
● Laser marking with Heat / Batch number, grade, size, specification (or text given by customer)
Package & Shipment
● Plastic bag, PU foam are used to protect surface of products for interior packing
● Seaworthy plywood boxes screwed with iron belt fastened tightly
● Mode of transport:
A. By express such as DHL, FEDEX (door to door)
B. By airplane (airport to airport)
C. By ship (seaport to seaport)
D. By train (station to station)
E. Multi-way transportation up on request
Essential tests and Quality Assurance
● Chemical analysis - metallic (ICP-OES) and gas (gas analyzer) elements
● Mechanical properties - tensile, yield, elongation, reduction of area, creep resistance, fracture toughness (at room or elevated temperature)
● Ultrasonic - 100% NDT for inspecting inner cracks, pores and other defections
● Microstructure - micrograph image (100X, 200X, 500X)
● Dimensional tolerance - diameter, length, straightness
● Surface contamination - surface defects checked by visual. Roughness measured by roughmeter.
● Hardness test - HB, HV, or HRC data reported
● Certificate - in house EN 10204 3.1 (traceable) / Third party (such as SGS) inspection